FORMENTOR

FORMENTOR

TYPE: KM


Accessories program for the Formentor

As the first complete own model from the performance brand Cupra, the new Formentor is the perfect base for customization from JE DESIGN.

From rims, lowering, exhaust systems to aerodynamic parts, you will find an overview of our tuning program for the Cupra Formentor here.

Aerodynamic parts



WIDEBODY-Kit


The 10-part wide body kit gives the Formentor a significantly more beefy look.

The add-on parts have a parts certificate and a Swiss test certificate and offer sufficient wheel cover for wheel-tire combinations up to 10 x 21 inches - our JE DESIGN performance wheel in 10 x 20 with 265 / tires offers the best in design and driving comfort. 30 R 20 or 275/30 R 20.
The indicated air outlet on the front wheel arch extension provides variety, in combination with a paint finish in a contrasting color, the sporty look is perfect.


Front spoiler 2-part


Exclusively for the WIDEBODY, we have developed a two-part front spoiler with a side fin. The component not only has a positive effect on the appearance of the mold, but also ensures an optimized air flow at the front of the vehicle.

For the sporty, ambitious driver, we can also optionally prepare the front spoiler in carbon fiber.


Rear wing


The large but elegant rear wing with a central air duct perfectly complements the dynamic appearance of the Formentor. The body of the Cupra gains a clear plus in sportiness and contact pressure thanks to the wing.

We also offer the rear wing in carbon fiber as an option. By using this light material, the component weighs just under 940g.

Trunk lid - Spoiler lip 3-parts


The spoiler lip for the trunk lid completes the sporty look of the Formentor. Both installed individually and in conjunction with other JE DESIGN components.

We also optionally offer the trunk lid spoiler lip in carbon fiber.


Street-Race-Kit


We have developed a subtle, sporty kit especially for the Cupra Formentor. This kit is called "Street Race", can be assembled without great effort and can even be dismantled again if necessary (leasing). All parts come with a glossy black surface, which makes painting unnecessary. Of course, if required, the parts can also be painted in the vehicle color or a contrasting color.

The kit consists of a 2-part front spoiler, front and rear fender covers and a 2-part roof edge spoiler. All parts are shown and described in detail below, including the respective link to our online shop.


Front spoiler 2-part


The two-part front spoiler is already supplied with a glossy black surface. This finish is coordinated with the factory-fitted black glossy parts on the exterior. Thanks to this surface finish and its special shape, the spoiler fits perfectly into the overall look of the sporty SUV coupe.

Rear spoiler 2-part


The two-part rear spoiler is also supplied with a glossy black finish to match the glossy black exterior parts that are factory-fitted to the Formentor. Thanks to its perfect fit, the spoiler can easily be glued to the roof edge and gives the Spaniard an even more dynamic look in the twinkle of an eye.

Air outlet front 2-part


In order to give the side view of the Cupra a little plus in aggressiveness and dynamism, we have developed a cover for the fender. This simulates an air outlet and adapts nicely to the look of the vehicle with its glossy black surface.

Air outlet rear 2-part


With these fake air outlet panels in black gloss, the Formentor has a much more aggressive look in the rear and side view. The covers are glued to the rear bumper and can be removed without leaving any residue if necessary, e.g. when returning a leased vehicle.


Exhaust systems

For the perfect sound, the original exhaust system is replaced by our JE DESIGN flap exhaust system from Kat

EC approval

Our exhaust system includes an EC approval - also for vehicles with increased performance (detailed information in the online shop)

Flap control

The control takes place via standard driving profile selection. In Sport and Cupra mode, the sound is aggressive and pithy, in Comfort mode, relaxed travel is the order of the day.

Made in Germany

Our exhaust systems are made of high quality stainless steel and made in Germany

Tailpipes

The exhaust has four oval tailpipes in black enamelled stainless steel. With the dimensions 106 x 71 mm, the system also fits perfectly on the standard rear apron.

Soundcheck Video


Suspension & lowering

Lowering springs

For a sportier driving behavior and a more dynamic look, we offer lowering springs for the Cupra Formentor. These are installed in connection with the original shock absorbers. The factory-installed DCC remains fully functional.

Spurverbreiterungen

Wheel spacers

Our wheel spacer kits are specially designed for the corresponding vehicles. Using the push-through system, the anodized aluminum spacers can be easily installed in connection with the standard rims. You can find detailed information on this at our online shop.

RIMS

For the Cupra Formentor, we offer rims in sizes from 19 to 21 inches, in various designs and surface finishes.


AVAILABLE DIMENSIONS


19" Cupra Formentor rims

Lucca 8 x 19 OS 40

20" Cupra Formentor rims

Lucca 8 x 20 OS 40

Twin Five 8.5 x 20 OS 30

Cádiz 8.5 x 20 OS 38

Performance 10 x 20 OS 35 (WIDEBODY)

21" Cupra Formentor rims

Design Star 9 x 21 OS 35

  • Cádiz Felge in 20 Zoll
    CÁDIZ
    Copper-R
  • Performance rim in 20 inch
    PERFORMANCE
    black semi gloss
  • LUCCA
    shiny black / front polished
  • LUCCA
    Copper-R
  • LUCCA
    shiny black

    Videos


    • Video: Cupra Formentor Widebody-Kit

      | JE DESIGN | Cupra News, New Videos
      The obligatory wide body kit from JE DESIGN for the new Cupra Formentor is about to be completed and the final acceptance in the model construction is pending. We take you behind the scenes and sh...
    • Video: Cupra Formentor initial contact

      | JE DESIGN | Cupra News, New Videos
      JE DESIGN first contact with the new Cupra Formentor. Of course, we have already implemented the first tuning measures with our 20 inch Lucca wheel and lowering springs. The Lucca rim has the size...

      News


      • Cupra Formentor initial contact

        Cupra Formentor initial contact

        | JE DESIGN | Cupra News
        CUPRA has been run as an independent brand in the group for some time, with the basic vehicles supplied by the manufacturer SEAT. So it's no wonder that JE DESIGN also takes on the CUPRA brand. The...

        Any questions about our products?

        Give us a call:

        +49 (0)7131 / 20384-0

        Or write an email to:

        This email address is being protected from spambots. You need JavaScript enabled to view it.

        Visit our Online-Shop

        JE DESIGN GmbH



        Benzstrasse 18-20
        74211 Leingarten
        Germany

        • +49 (0)7131 / 20384-0

        • +49 (0)7131 / 20384-20

        • This email address is being protected from spambots. You need JavaScript enabled to view it.

        Office Hours



        Monday - Thursday

        08:00 - 12:00 and 13:30 - 17:00 h

        Friday

        08:00 - 12:00 h

        © 2021 JE DESIGN GmbH