Deutsch 
English 
WIDEBODY kit
The 10-part widebody kit developed by JE DESIGN gives the Cupra Formentor Facelift an even more powerful and unmistakable appearance.
The widebody components are designed to match the revised design language of the latest Formentor generation and emphasize its sporty proportions from every angle. The kit comes with a parts certificate as well as a Swiss homologation certificate and provides sufficient wheel coverage for wheel and tire combinations up to 10 x 21 inches. Our JE DESIGN Performance wheel in 10 x 20 inches in combination with 265/30 R20 or 275/30 R20 tires offers the ideal balance of design and driving comfort.
The integrated air outlet design on the front wheel arch extensions additionally enhances the dynamic character of the vehicle. Combined with a contrasting paint finish, the sporty appearance is taken to the next level.
Rear wing
The large yet elegant rear wing with its central air duct perfectly complements the dynamic appearance of the Cupra Formentor Facelift. The rear design gains an even sportier character, while the wing additionally enhances the vehicle’s aerodynamic presence and visual downforce.
Carbon & forged carbon rear wing
Our rear wing is also available in both Carbon Fiber and Forged Carbon finishes. Thanks to the lightweight material construction, the component combines an exclusive high-end appearance with a remarkably low overall weight of just approx. 940 g.
Trunk lid - Spoiler lip 3-piece
The spoiler lip for the trunk lid perfectly complements the sporty rear design of the Cupra Formentor Facelift. Whether installed as a standalone highlight or in combination with other JE DESIGN components, it adds a more dynamic and refined appearance to the vehicle’s rear section.
Front spoiler 3-piece
A specially developed 3-piece front spoiler is available for the Cupra Formentor Facelift and can be used both with the standard body design as well as with our JE DESIGN WIDEBODY kit.
The front spoiler not only sharpens the vehicle’s sporty appearance, but is also easy to install using high-quality 3M adhesive tape, making it suitable for leasing vehicles as well.
Rear spoiler 2-piece
The 2-piece rear spoiler is finished in high-gloss black to perfectly match the factory exterior design lines of the Cupra Formentor Facelift.
Thanks to its precise fitment, the spoiler is mounted directly onto the roof edge using high-quality adhesive technology. The component enhances the sporty rear design and gives the vehicle an even more dynamic and refined appearance while requiring only minimal installation effort.
Diffuser
The JE DESIGN rear diffuser for the Cupra Formentor Facelift gives the rear section an even sportier and more distinctive appearance. The glossy black finish perfectly complements the dynamic design language and creates a more aggressive rear-end look while maintaining the refined OEM+ character of the vehicle.
Manufactured from high-quality ABS plastic, the diffuser is mounted directly onto the original rear bumper using the supplied mounting hardware. In addition to its visual enhancement, the diffuser has been developed with everyday usability in mind. When driving off-road or towing a trailer, the diffuser insert can be easily removed, allowing the fold-out trailer coupling to remain fully functional.
Air outlet cover - front
The JE DESIGN Air Outlet Covers for the front fenders give the Cupra Formentor Facelift an even sportier and more refined appearance. Inspired by modern high-performance vehicle design, the components visually enhance the side profile and create a more dynamic overall look.
The components are precisely matched to the front fenders of the Cupra Formentor Facelift and are installed using high-quality adhesive technology for a clean and secure fit.
The 2-piece covers are available in high-gloss ABS, Carbon Fiber and Forged Carbon finishes, allowing either a subtle integration into the vehicle design or a distinctive visual contrast.
Air outlet cover - rear
The JE DESIGN Air Outlet Covers for the rear bumper give the vehicle a sharper and more distinctive rear appearance. Inspired by high-end performance vehicle styling, the components visually emphasize the outer sections of the rear bumper and create a more dynamic overall look.
The components are precisely matched to the original rear bumper and are installed using high-quality adhesive technology for a clean and secure fit. The 2-piece covers are available in a high-gloss ABS finish, allowing a sporty and elegant integration into the vehicle design.
Suspension & lowering
Lowering springs
For an even sportier appearance and improved driving dynamics, JE DESIGN offers specially developed lowering springs for the Cupra Formentor Facelift.
The springs are designed to work in combination with the factory shock absorbers and provide a more dynamic stance without significantly compromising everyday usability. Vehicles equipped with the original DCC suspension system retain full functionality of all driving modes and damping adjustments.
Wheel spacers
Our wheel spacer kits are specifically developed for the Cupra Formentor Facelift and ensure an even more powerful and well-balanced vehicle stance.
The high-quality anodized aluminum spacers are installed using the proven push-through system and can be combined with factory wheels. Detailed technical information and available versions can be found in our online shop.
Wheels
For the Cupra Formentor Facelift, we offer wheels in sizes from 18 to 20 inches, available in various designs and surface finishes.
AVAILABLE DIMENSIONS
- Avila 8 x 18 OS 40
- Badia 8 x 18 OS 40
- Lucca 8 x 18 OS 39
- Muro 8 x 18 OS 40
- Avila 8 x 19 OS 39
- Badia 8 x 19 OS 37
- Lucca 8 x 19 OS 40
- Muro 8 x 19 OS 40
- Rubí 8 x 19 OS 40
- Badia 8 x 20 OS 41
- Cádiz 8.5 x 20 OS 38
- Design Star 9 x 20 OS 33
- Lucca 8 x 20 OS 40
- Rubí 8 x 20 OS 40
- Rubí 9 x 20 OS 42
- Rubí 9 x 20 OS 35
- Performance 10 x 20 OS 35 (WIDEBODY)
-
CÁDIZ
-
RUBÍ
-
PERFORMANCE
-
MURO
-
LUCCA
-
MURO
-
LUCCA
-
AVILA
-
RUBÍ
-
LUCCA
-
BADIA
